Teltonika FM5300

Functional features:

• obtaining exact coordinates of GPS/GLONASS, and also given conditions of entrance interfaces
• possibility of monitoring far off moving objects in real time,
• flexible and effective algorithm of collection of information (time, the passable way, a condition of ignition, change of a corner, etc.),
• transfer of the obtained data through the high-speed GPRS protocols (TCP/IP and UDP/IP),
• reliable algorithm of the GPRS connections, with a possibility of economy of a traffic,
• roaming existence (creation of the preferred lists of the operators GSM is allowed),
• triggers of fixation of events on entrance interfaces with the subsequent notification by the SMS or GPRS,
• according to the set schedule 24 coordinates by the SMS are sent,
• rectangular or round geozones,
• existence of the expectations mode will allow to save energy of the accumulator at the idle engine,
• possibility of updating of a configuration on GPRS,
• the three-axial accelerometer will define changes in the movement and acceleration (sharp acceleration or braking, an angle of rotation),
• existence of the built-in scenarios of monitoring (control of the high-speed mode, behavior of the driver on the road),
• reliable identification of the driver (1-Wire iButton),
• voice GSM call with in advance chosen subscriber,
• two modifications of the accumulator (external or internal) with control of a charge.

Technical characteristics:

1) GSM/GPRS parameters:

• the Teltonika TM11Q module on four ranges (GSM 850/900/1800/1900 MHz),
• 10 C. GPRS,
• SMS

2) GPS/GLONASS parameters and hardware characteristics:

• sensitivity of-160 dBm,
• Fastrax IT600, the receiver on 32 channels,
• NMEA-0183 protocol: GGL, GSA, GSV, GGA, VTG, RMC,
• GNSS GGG303 module,
• the Cortex processor - M3,
• accelerometer,
• built in a flash memory on 4 MB.

3) Parameters of interfaces:

• on 4 analog and digital entrances,
• food of 10-30 V,
• four digital output for connection of external relays,
• temperature sensor,
• the number of RS-232 ports - 2 pieces,
• audio interface and USB port,
• existence of LED indication,
• support of messages of CAN 2.0 in the active mode (to 1 Mbit/sec.).